| Pebax® 2533 SA 01 | Polyether block amide Pebax® 2533 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SA grade is specially designed to food uses. Its chemical structure also enables the absorption and the controlled release of volatile molecules (fragrances, oils, insecticides...).
Main applications:
- Flexible injected parts.
- Controlled release of volatile moleculres (fragrances, oils, insecticides, etc...).
Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags or 550kg rigid containers) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 2533 SA 01 MED | Polyether block amide Pebax® 2533 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Arterial catheters.
- Flexible injected parts.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 2533 SD 02 | Polyether block amide Pebax® 2533 SD 02 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SD grade is heat and UV stabilized and contains mould release additive.
Main applications:
- Flexible injected parts.
- Silent gears.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above the limit, please refer to our technical services. |
| Pebax® 3533 SA 01 | Polyether block amide Pebax® 3533 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses.
Main applications:
- Flexible injected parts.
Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 3533 SA 01 MED | Polyether block amide Pebax® 3533 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Arterial catheters
- Flexible injected parts
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 3533 SP 01 | Polyether block amide Pebax® 3533 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.
Main applications:
- Flexible injected parts.
- High performance power transmission belts.
- Silent gears.
- Toy component.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 4033 SA 01 | Polyether block amide Pebax ® 4033 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses.
Main applications:
- Flexible injected parts.
- PA6 film modifier.
Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 4033 SA 01 MED | Polyether block amide Pebax® 4033 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Arterial catheters.
- Flexible injected parts.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 4033 SP 01 | Polyether block amide Pebax® 4033 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- Flexible injected parts.
- High performance power transmission belts.
- Silent gears.
- PA6 film modifier.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags and 550 rigid containers) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 4533 SA 01 | Polyether block amide Pebax® 4533 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses.
Main applications:
- Flexible injected parts.
- Silent gears.
- TPU processing aid.
Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 4533 SA 01 MED | Polyether block amide Pebax® 4533 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Arterial catheters.
- Flexible injected parts.
Packaging:
This guide is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 4533 SP 01 | Polyether block amide Pebax® 4533 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- Flexible injected parts.
- High performance power transmission belts.
- Silent gears.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 5533 SA 01 | Polyether block amide Pebax® 5533 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SA grade is specially designed to food uses.
Main applications:
- Flexible injected parts.
- Dental floss.
- Food tubing.
Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used.
Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 5533 SA 01 MED | Polyether block amide Pebax® 5533 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
Pebax® 5533 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response.
Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Tubings like angiography and angioplasty catheters.
- Flexible injected parts.
Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 5533 SN 70 BLACK | Pebax® 5533 SN 70 BLACK resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SN 70 grade is made conductive thanks to carbon black.
Main applications:
- Conductive injected parts.
- Hose for fuel transportation.
Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 5533 SP 01 | Polyether block amide Pebax® 5533 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- Athletic foot wear components.
- Ski shoes.
- High performance power transmission belts.
Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 6333 SA 01 | Polyether block amide Pebax® 5533 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.
Main applications:
- Athletic foot wear components.
- Fibers.
Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used.
Packaging:
This grade is delivered dried in sealed packaging (20 to 25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 6333 SA 01 MED | Polyether block amide Pebax® 6333 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
Pebax® 6333 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response.
Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Tubings like angiography and angioplasty catheters.
- Flexible injected parts.
Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 6333 SP 01 | Polyether block amide Pebax® 6333 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- Athletic foot wear components.
- Ski boots.
Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 6333 SP 01 White | Polyether block amide Pebax® 6333 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- Athletic foot wear components.
- Ski boots.
Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 7033 SA 01 | Polyether block amide Pebax® 7033 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is suitable for food contact applications.
Main applications:
- Athletic foot wear components.
- Food tubing.
Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used.
Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 7033 SA 01 MED | Polyether block amide Pebax® 7033 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
Pebax® 7033 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response.
Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Tubings like angiography and angioplasty catheters.
- Flexible injected parts.
Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 7033 SP 01 | Polyether block amide Pebax® 7033 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- Athletic foot wear components.
- Ski shoes.
- Tennis rocket bumpers.
- Zip fasteners.
Packaging:
This grade is delivered dried in sealed packaging (20 to 25 kg bags) ready to be processed.
Shelf Life:
Two years from the deliverty. For any use above this limit, please refer to our technical services. |
| Pebax® 7233 SA 01 | Polyether block amide Pebax® 7233 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is suitable for food contact applications.
Main applications:
- Athletic foot wear components.
- Ski shoes.
Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax ® SA 01 MED should be used.
Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 7233 SA 01 MED | Polyether block amide Pebax® 7233 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
Pebax® 7233 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response.
Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Tubing like angiography and angioplasty catheters.
- Flexible injected parts.
Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 7233 SP 01 | Polyether block amide Pebax® 7233 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- Athletic foot wear components.
- Ski shoes.
- Zip fasteners.
- Hook and loop fasteners.
Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® 7433 SA 01 MED | Polyether block amide 7433 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
Pebax® 7433 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response.
Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Tubing like angiography and angioplasty catheters.
- Flexible injected parts.
Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® C 50C73 SP 01 | Polyether block amide Pebax® C 50C73 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources.
Pebax® C is the new route explored to design cost-efficient components while preserving Pebax® resin key features.
The percentage of renewable carbon according to ASTM D 6866 (calculated) is 40%.
Main applications:
- Athletic foot wear components.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags).
Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services. |
| Pebax® C 63C73 SP 01 | Polyether block amide Pebax® C 63C73 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant.
Pebax® C is the new route explored to design cost-efficient components while preserving Pebax® resin key features.
The percentage of renewable carbon according to ASTM D 6866 (calculated) is 51%.
Main applications:
- Athletic foot wear components.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags).
Shelf life:
Two years from the date of delivery. For only use above this limit, please refer to our technical services. |
| Pebax® Clear 1200 | Pebax® Clear 1200 resin combines a high transparency level with the excellent performance of Pebax® thermoplastic elastomer resin.
Pebax® Clear 1200 resin is produced from a renewable source.
Main applications:
- Consumer goods
- Sport equipments
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags).
Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services. |
| Pebax® Clear 300 | Pebax® Clear 300 resin combines high transparency level with the unique performance of Pebax® thermoplastic elastomer resin made of flexible polyether and rigid polyamide.
Main applications:
- Sport shoes.
- Ski shoes.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags).
Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services. |
| Pebax® Clear 400 | Pebax® Clear 400 resin combines high transparency level with the unique performance of Pebax®, thermoplastic elastomer made of flexible polyether and rigid polyamide.
Main applications:
- Sport shoes.
- Ski shoes.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags).
Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services. |
| Pebax® Clear 600 | Pebax® Clear 600 resin combines high transparency level with the unique flex fatigue resistance and easy processing of Pebax® resin.
Main applications:
- Sport shoes.
- Sport equipments.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags).
Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services. |
| Pebax® HD 5513 SA 01 | Polyether block amide Pebax® HD 5513 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Added to PA6, Pebax® HD 5513 SA 01 resin enhances the properties of PA6, especially at low temperatures and low humidity content, at the same time maintaining the transparency of the nylon film and improving its soft touch.
This SA grade is specially designed to food uses.
Main applications:
- PA6 film additive.
Packaging:
This grade is delivered dried in sealed packaging (454 kg rigid containers) ready to be processed.
Shel Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® HD 5513 SP 01 | Polyether block amide Pebax® HD 5513 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Added to PA6, Pebax® HD 5513 SP 01 resin enhances the properties of PA6, especially at low temperatures and low humidity content, at the same time maintaining the transparency of the nylon film and improving its soft touch.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- PA6 film additive.
Packaging:
This grade is delivered dried in sealed packaging (20 kg and 25 kg bags and 454 kg rigid containers) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® HD 6313 SP 01 | Polyether block amide Pebax® HD 6313 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Added to PA6, Pebax® HD 6313 SP 01 resin enhances the properties of PA6, especially at low temperatures and low humidity content, at the same time maintaining the transparency of the nylon film and improving its soft touch.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- PA6 film additive.
Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MF 5010 | Polyether block amide Pebax® MF 5010 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MF 5010 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.
This grade is particularly designed to be used in injection with PC and PBT blends at a loading rate of 10-20%.
Main applications:
- Permanent antistatic additive for PC blends.
- Dust protection for PC parts.
- Dust protection for PBT parts.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MF 5020 | Polyether block amide Pebax® MF 5020 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide Pebax® MF 5020 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.
This grade is particularly designed to be used in injection with POM blends at a loading rate of 10-20%.
Main applications:
- Permanent antistatic additive for POM blends.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MF 5030 | Polyether block amide Pebax® MF 5030 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MF 5030 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.
This grade is particularly designed to be used in injection with polyolefin blends at a loading rate of 10-20%.
Main applications:
- Permanent antistatic, additive for Polyolefin blends.
- Dust protection for automotive PP parts.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MF 5040 | Polyether block amide Pebax® MF 5040 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Pebax® MF 5040 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.
This grade, stabilized to be heat and UV resistant, is particularly designed to be used in extrusion blow molding with PE at a loading rate 20-30%.
Main applications:
- Permanent antistatic additive for PE bulk containers.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MF 5070 | Polyether block amide Pebax® MF 5070 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MF 5070 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.
This grade is particularly designed to be used in blown film with PE at a loading rate of 20-30%. For optimal ratio cost/performance we recommend to use this Pebax® antistatic grade in the surface layer(s) of multilayer film.
Main applications:
- Permanent antistatic additive for PE films.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MF 5080 | Polyether block amide Pebax® MF 5080 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Pebax® MF 5080 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.
This grade is particularly designed to be used in blown film with PE at a loading rate of 20-30%. For optimal ratio cost/performance we recommend to use this Pebax® antistatic grade in the surface layer(s) of multilayer film.
Pebax® MF 5080 resin is recommended for food contact applications.
Main applications:
- Permanent antistatic additive for PE films.
- Food applications.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MH 1657 | Polyether block amide Pebax® MH 1657 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Pebax® MH 1657 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part.
This hydrophilic grade when extruded into either a thin film or laminated on to a substrate also offers excellent permeability to moisture vapor while remaining waterproof.
Main applications:
- Breathable membranes.
- Permanent antistatic additive.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags and 550 kg rigid containers) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MH 2030 | Polyether block amide Pebax® MH 2030 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Pebax® MH 2030 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part.
Main applications:
- Permanent antistatic additive.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MV 1041 SA 01 | Polyether block amide Pebax® MV 1041 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof and offering an excellent barrier layer to bacteria.
This SA grade is specially designed to food uses.
Main applications:
- Breathable membranes.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MV 1074 SA 01 | Polyether block amide Pebax® MV 1074 SA 01 is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide.
Pebax® MV 1074 SA 01 resin is also an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.
This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.
This SA grade is specially designed to food uses.
Main applications:
- Breathable membranes.
- Permanent antistatic additive.
Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags and 550 kg rigid containers) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MV 1074 SA 01 MED | Polyether block amide Pebax® MV 1074 SA 01 MED resin is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide.
Hydrophilic Pebax® MV 1074 SA 01 MED resin is suitable for extrusion or coextrusion and offers excellent high moisture absorption properties in wet environments, enhancing lubricity against bodily tissue.
Pebax® MV 1074 SA 01 MED resin is also an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request, letters regarding USP Class VI compliance can be provided.
Main applications:
- Breathable membranes.
- Permanent antistatic additive.
- Surgical tubings and garments.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MV 1074 SP 01 | Polyether block amide Pebax® MV 1074 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Pebax® MV 1074 SP 01 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.
This SP grade has been developed to be heat and UV resistant.
Main applications:
- Breathable membranes.
- Permanent antistatic additive.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MV 2080 | Polyether block amide Pebax® MV 2080 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Pebax® MV 2080 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity.
Main applications:
- Permanent antistatic additive.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |
| Pebax® MV 3000 SP 01 | Polyether block Pebax® SP 3000 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.
This SP grade is specifically designed for outdoor application that needs excellent weather resistance properties.
Main applications:
- Breathable membranes.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services. |